Reference Number: 144607

K.O. LEE "DAKOTA" SERIES (WHEELHEAD TILTS & SWIVELS)
 UNIVERSAL TOOL & CUTTER GRINDER WITH BALL BEARING TABLE FEED
 
 MODEL: B6060B       S/N: 26384YL        NEW: 1992 
 
  SWING OVER TABLE ........................... 12-1/4" 
 DISTANCE BETWEEN TAILSTOCKS ..................... 32" 
 TABLE WORKING SURFACE .............. 5-1/4" X 37-1/4" 
 SUB TABLE .................................. 8" X 48" 
 LONGITUDINAL TABLE TRAVERSE ..................... 20" 
 TABLE FEED PER REV. OF HANDWHEEL: 
 FAST ....................................... 2-13/16" 
 SLOW .......................................... 9/16" 
 CROSS FEED ....................................... 8" 
 FEED PER REV. OF HANDWHEEL (.001" GRAD.) ,,... 0.100" 
 VERTICAL MOVEMENT OF COLUMN ................. 10-1/2" 
 FEED PER REV. OF HANDWHEEL (.001" GRAD.)...... 0.050" 
 COLUMN DIAMETER .................................. 6" 
 MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL 
 SHAFT TO TABLE ......................5-3/8" / 15-1/4" 
 MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
  OF STRAIGHT WHEEL; DOVETAIL SLIDE NOT EXTENDED,
  SPINDLE 90 DEG. TO TABLE .................... 4-5/8" 
 MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
  OF STRAIGHT WHEEL; DOVETAIL SLIDE EXTENDED,
  SPINDLE 90 DEGREES TO TABLE ................. 9-1/4" 
 TABLE SWIVELS (CALIBRATION: 3" PER FT.,
  15 DEG. EITHER SIDE OF CENTER) .......... 225 DEGREES 
 WHEEL HEAD SWIVEL ........................ 360 DEGREES 
 MAXIMUM I.D. DEPTH, HOLE SIZE 9/32" TO 2" ..... 1-1/4" 
 MAXIMUM CROSS FEED SURFACE GRINDING W/8" WHEEL..... 3" 
 SPINDLE SPEED RANGE ................. 3450 TO 17250 RPM
  
 APPROXIMATE MACHINE WEIGHT ................. 1,300 LBS 
 
  EQUIPPED WITH:
 BALL BEARING TABLE 
 FRONT & REAR HANDWHEELS FOR TABLE TRAVERSE 
 "DAKOTA" SERIES #B6055 UNIVERSAL GRINDING WHEELHEAD 
  FEATURES: 
 - SWIVELLING & TILTING (22 DEG. EITHER SIDE 
 OF VERTICAL) 
 - 1 HP MOTOR WIRED FOR 3/60/460 VOLT OPERATION 
 - 3/4" TO 6" DIAMETER WHEELS (O.D. GRINDING)
 BIJUR LUBRICATOR (ONE-SHOT) 
 
 (1) HIGH SPEED GRINDING HEAD, QUILL ASSEMBLY B6055A
 (1) B942 SENSITIVE WORK HEAD
 (1) SET OF TAILSTOCKS B922
 (1) UNIVERSAL TOOTH REST B6040
 (1) PLAIN TOOTH REST B827
 (1) DIAMOND DRESSER B6040K
 (1) CENTER GAUGE B6039
 (1) 6" WHEEL GUARD B2460
 
 
  ** EXCELLENT CONDITION & APPEARANCE (ORIGINAL PAINT) ** 
 ** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **