Reference Number: 143043

13.8" X 24" KELLENBERGER "SWISS" "HIGH-PRECISION" 
 UNIVERSAL I.D./O.D/FACE GRINDING CYLINDRICAL GRINDER
 
 FACTORY RISER BLOCKS AVAILABLE FROM
 KELLENBERGER TO INCREASE THE SWING OF THIS MACHINE 
 TO 19- 5/8" (250mm CENTER HEIGHT)
 KELLENBERGER PART #KB-0107211 
 
 MODEL:  600U  S/N: 1320-451  NEW:  1982 
 
                                                        
 
 HEIGHT OF CENTERS, AS PRESENTLY CONFIGURED .... 13.8"
 MAXIMUM SWING WITH FACTORY RISER BLOCKS ....... 19- 5/8"
 DISTANCE BETWEEN CENTERS (NOMINAL)............. 23- 5/8"
 DISTANCE BETWEEN CENTERS W/TAILSTOCK                    
  OVERHANGING .................................. 29- 1/2"
                                                        
 TABLE:                                                  
 LONGITUDINAL TABLE TRAVEL .................... 35- 1/2"
 LONGITUDINAL TABLE TRAVEL PER TURN OF HANDWHEEL:        
  COARSE ....................................... 25/32" 
  FINE .......................................... 3/32" 
 LONGITUDINAL TABLE SPEED (HYDRAULIC) .. 0.06 TO 18' FPM 
 TABLE SWIVELS .............................. 11 DEGREES 
 REVERSING DWELL ........................ 0 TO 5 SECONDS 
 GRINDING WHEEL INFEED:                                    
  1 GRADUATION OF FEED SCALE .................. 0.0002"   
  AUTOMATIC FEED, MAXIMUM ...................... 0.035"   
  AUTO. INFEED PER TABLE REVERSAL .. 0.00005" TO .0012"   
  INFEED FOR PLUNGE GRINDING ........ 0.00004" TO .002"
  PLUNGE GRINDING: INFEED SPEED ... 10 TO 1000 uIN/SEC   
  MICROMETER STOP, 1 GRADUATION .............. 0.00005"   
                                                          
 UNIVERSAL GRINDING SPINDLE HEAD:                          
  TRANSVERSE MOVEMENT OF WHEEL SLIDE .......... 11-1/4"   
  HYDRAULIC RAPID WHEEL SLIDE ADVANCE/RETRACTION          
    STROKE ................................... 1-9/16"   
  GRINDING WHEEL SPEEDS (4) 1500, 1700, 2200 & 3600 RPM   
  GRINDING WHEEL FOR CYLINDRICAL                          
    GRINDING ............................ 16" X 2" X 5"   
  GRINDING WHEEL (SURFACE GRINDING) ... 10" X 3/4" X 3"   
  SWIVEL OF GRINDING HEAD W/LOCKING EVERY                 
    90 DEGREES ............................ 270 DEGREES   
  VERTICAL MOTION OF GRINDING SPINDLE HEAD,               
    HEIGHT OF CENTERS ........... 4-59/64" TO 13-25/32"   
                                                          
 WORKHEAD:                                                 
  INFINIT. VARIABLE SPINDLE SPEEDS ........ 10 - 400 RPM  
  WORKHEAD SWIVELS ........................ 360 DEGREES   
  INSIDE TAPER OF WORK SPINDLE ................... #5MT   
                                                          
 APPROXIMATE FLOOR SPACE REQUIRED .... 102" X 64" X 66"H   
 APPROXIMATE MACHINE WEIGHT .................. 6,000 LBS   
                                                          
 MACHINE FEATURES:                                         
 HYDRAULIC OPERATION FEATURING:                            
 -SINGLE LEVER CONTROL                                     
 -INFINITELY VARIABLE TABLE TRAVERSE                       
 -AUTOMATIC INFEED                                         
 -PLUNGE INFEED                                            
 -RAPID WHEEL ADVANCE & RETRACTION                         
 SPARKOUT TIMER                                            
 ADJUSTABLE CENTER HEIGHT FEATURE W/MAXIMUM SWING 19.625"    
 DUAL LEFT-HAND (O.D.) & RIGHT-HAND WHEEL MOUNTING (FACE GRINDING) WITH SWING AROUND I.D. GRINDING UNIT               
                                                          
 EQUIPPED WITH:
 THREE WHEELHEAD MACHINE .... O.D./I.D/FACE GRINDING
 CURRENTLY SET-UP AS 13.8" SWING,  CAPACITY CAN BE INCREASED
  TO 19- 5/8" MAX. SWING .... SEE INFO ABOVE & BELOW ON
  QUOTATION                                            
 -SWING AROUND INTERNAL GRINDING ATTACHMENT                  
 -INTERNAL GRINDING SPINDLE, MADE BY FORTUNA, 12,500 MAX. 
  RPM, MODEL No. 580x250R, S/N: 150465 
 -9" DIAMETER MAGNETIC CHUCK W/ADAPTOR TO #5MT & DRAWBAR
 -4-JAW CHUCK MOUNTED ON A FACE PLATE, 5MT ADAPTOR & 
  DRAW BAR 
 -6-JAW CHUCK
 -9- 1/2" DIAMETER FACE PLATE
 -2-POINT STEADY REST
 -SWING BACK TABLE MOUNTED WHEEL DRESSER w/MICROMETER
  ADJUSTMENT COMPLETE w/BASE PLATE
 -DRIVE DOGS
 -DRAW BAR FOR 5C COLLETS COMPLETE WITH 5C COLLET NOSE PIECE
 -#5 MT TO #2MT REDUCTION SLEEVE & DRAW BAR
 -#5MT TO #3MT REDUCTION SLEEVE (TAPER LOCK)
 -CABINET FOR STORAGE OF ACCESSORIES
  
 STANDARD WORKHEAD W/DUAL LIVE & DEAD WORKHEAD SPINDLE
 4 H.P. WHEELHEAD MOTOR
 "DARENTH" COOLANT SYSTEM w/PAPER FILTRATION
 PRESENTLY WIRED FOR 460 VOLTS
 
 SPECIAL NOTE:
 FACTORY RISER BLOCKS AVAILABLE FROM KELLENBERGER TO 
 INCREASE THE SWING OF THIS MACHINE TO 19- 5/8" (250mm CENTER HEIGHT)
 KELLENBERGER PART #KB-0107211 
 
 ** THIS MACHINE WAS COMPLETELY TAKEN APART & GONE THROUGH 
    BY OUR STAFF. WHAT A TERRIFIC MACHINE! **
 
 ** EXCEPTIONAL CONDITION & APPEARANCE **
 ** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **