Reference Number: 136664

MODEL CPO-350 PKPD SEMI-AUTOMATIC COLD SAW
 VARIABLE SPEED MODEL 
 STANDARD FEATURES
 Semi-Automatic Cycle 
 Pneumatic Power Down Feed with Electric Controls 
 Separate Feed Control of both Feed Rate and Feed Pressure 
 Power Double Self-Centering Vise Assures Burr-Free Cuts 
 Emergency Stop Button 
 Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right 
 Miter Locking Devise Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right 
 Capable of Slotting 
 Variable Speeds 
 Double Reduction, Hardened and Ground Worm and Wheel Gear Box 
 Worm Wheel of Top Quality Bronze 
 7 Gallon Coolant Tank with Pump 
 30" Material Length Stop 
 One 12-1/2" Diameter (315 mm) HSS Blade 
 One Blade Wrench 
 One Gallon Concentrated Coolant 
 230 or 460 Volt /3 Phase Electrics (must specify voltage) 
 Warranty: One Year Parts 
 Made in USA
 
 Capacities & Specifications
 
 HT (High Turn) designed for thin wall tube and non-ferrous 
 material (Must specify when ordering):
 HT (High Turn) Variable Speed Drive: 24 RPM or 208 RPM
 Motor Rate: 5 hp
 Factory Wired (Specify): 208 3 ph - 230 3 ph - 460 4 ph - 575 volt 3 ph 60 hz
 
 TUBING 90 DEGREES:
 Round: 4-7/8"
 Square: 4-1/2" x 4-1/2"
 Rectangle: 5-1/2" x 4"
 
 TUBING 45 DEGREES:
 Round: 4-3/8"
 Square: 4" x 4"
 Rectangle: 4" x 4"
 
 SOLID 90 DEGREES:
 Round: 2"
 Square: 2" x 2"
 
 SOLID 45 DEGREES:
 Round: 1-3/4"
 Square: 1-3/4" x 1-3/4"
 
 Max Dia Blade: 14"
 Arbor Bore: 1-9/16"
 Pin Spacing: 4/12/64
 Width: 21-7/8"
 Depth: 43-1/2"
 Height Not Including Handle: 56-1/4"
 Height From Floor To Vise: 37-7/16"
 Shipping Weight: 675 lbs.